Publications of Brian P. Mann

Papers Published

  1. Butcher, Eric A. and Mann, Brian P., Analytic Bounds for Instability Regions in Periodic Systems With Delay via Meissner's Equation, JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS, vol. 7 no. 1 (January, 2012), ISSN 1555-1423
  2. Dunnmon, J. A. and Stanton, S. C. and Mann, B. P. and Dowell, E. H., Power extraction from aeroelastic limit cycle oscillations, JOURNAL OF FLUIDS AND STRUCTURES, vol. 27 no. 8 (November, 2011), pp. 1182-1198, ISSN 0889-9746
  3. Khasawneh, Firas A. and Mann, Brian P., Stability of delay integro-differential equations using a spectral element method, MATHEMATICAL AND COMPUTER MODELLING, vol. 54 no. 9-10 (November, 2011), pp. 2493-2503, ISSN 0895-7177
  4. Khasawneh, Firas A. and Mann, Brian P., A spectral element approach for the stability of delay systems, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, vol. 87 no. 6 (August, 2011), pp. 566-592, ISSN 0029-5981
  5. Mann, B. P. and Khasawneh, F. A. and Fales, R., Using information to generate derivative coordinates from noisy time series, COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, vol. 16 no. 8 (August, 2011), pp. 2999-3004, ISSN 1007-5704
  6. Sneller, A. J. and Cette, P. and Mann, B. P., Experimental investigation of a post-buckled piezoelectric beam with an attached central mass used to harvest energy, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING, vol. 225 no. I4, SI (June, 2011), pp. 497-509, ISSN 0959-6518
  7. Stanton, Samuel C. and Erturk, Alper and Mann, Brian P. and Inman, Daniel J., Resonant manifestation of intrinsic nonlinearity within electroelastic micropower generators, APPLIED PHYSICS LETTERS, vol. 97 no. 25 (December, 2010), ISSN 0003-6951
  8. Stanton, Samuel C. and Erturk, Alper and Mann, Brian P. and Inman, Daniel J., Nonlinear piezoelectricity in electroelastic energy harvesters: Modeling and experimental identification, JOURNAL OF APPLIED PHYSICS, vol. 108 no. 7 (October, 2010), ISSN 0021-8979
  9. Sneller, Adam J. and Mann, Brian P., On the nonlinear electromagnetic coupling between a coil and an oscillating magnet, JOURNAL OF PHYSICS D-APPLIED PHYSICS, vol. 43 no. 29 (July, 2010), ISSN 0022-3727
  10. Stanton, Samuel C. and Mann, Brian P., On the dynamic response of beams with multiple geometric or material discontinuities, MECHANICAL SYSTEMS AND SIGNAL PROCESSING, vol. 24 no. 5, SI (July, 2010), pp. 1409-1419, ISSN 0888-3270
  11. Bhattacharyya, Abhijit and Schueller, John K. and Mann, Brian P. and Ziegert, John C. and Schmitz, Tony L. and Taylor, Fred J. and Fitz-Coy, Norman G., A closed form mechanistic cutting force model for helical peripheral milling of ductile metallic alloys, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, vol. 50 no. 6 (June, 2010), pp. 538-551, ISSN 0890-6955
  12. Mann, B. P. and Patel, B. R., Stability of Delay Equations Written as State Space Models, JOURNAL OF VIBRATION AND CONTROL, vol. 16 no. 7-8, SI (June, 2010), pp. 1067-1085, ISSN 1077-5463
  13. Stanton, Samuel C. and McGehee, Clark C. and Mann, Brian P., Nonlinear dynamics for broadband energy harvesting: Investigation of a bistable piezoelectric inertial generator, PHYSICA D-NONLINEAR PHENOMENA, vol. 239 no. 10 (May, 2010), pp. 640-653, ISSN 0167-2789
  14. Mann, B. P. and Sims, N. D., On the performance and resonant frequency of electromagnetic induction energy harvesters, JOURNAL OF SOUND AND VIBRATION, vol. 329 no. 9 (April, 2010), pp. 1348-1361, ISSN 0022-460X
  15. Mann, B. P. and Owens, B. A., Investigations of a nonlinear energy harvester with a bistable potential well, JOURNAL OF SOUND AND VIBRATION, vol. 329 no. 9 (April, 2010), pp. 1215-1226, ISSN 0022-460X
  16. Bobrenkov, Oleg A. and Khasawneh, Firas A. and Butcher, Eric A. and Mann, Brian P., Analysis of milling dynamics for simultaneously engaged cutting teeth, JOURNAL OF SOUND AND VIBRATION, vol. 329 no. 5 (March, 2010), pp. 585-606, ISSN 0022-460X
  17. Stanton, Samuel C. and Erturk, Alper and Mann, Brian P. and Inman, Daniel J., ON THE MANIFESTATION AND INFLUENCE OF MATERIAL NONLINEARITY IN ELECTROELASTIC POWER GENERATORS, in PROCEEDINGS OF THE ASME CONFERENCE ON SMART MATERIALS, ADAPTIVE STRUCTURES AND INTELLIGENT SYSTEMS, 2010, VOL. 1 (2010), pp. 261-266, ISBN 978-0-7918-4415-1
  18. Khasawneh, Firas A. and Mann, Brian P. and Bobrenkov, Oleg A. and Butcher, Eric A., SELF-EXCITED VIBRATIONS IN A DELAY OSCILLATOR: APPLICATION TO MILLING WITH SIMULTANEOUSLY ENGAGED HELICAL FLUTES, in PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, VOL 1, PT B (2010), pp. 1387-1395, ISBN 978-0-7918-4898-2
  19. Stanton, Samuel C. and Mann, Brian P., HARVESTING ENERGY FROM THE NONLINEAR OSCILLATIONS OF A BISTABLE PIEZOELECTRIC INERTIAL ENERGY GENERATOR, in PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, VOL 1, PTS A AND B (2010), pp. 447-456, ISBN 978-0-7918-4898-2
  20. Stanton, Samuel C. and McGehee, Clark C. and Mann, Brian P., Reversible hysteresis for broadband magnetopiezoelastic energy harvesting, APPLIED PHYSICS LETTERS, vol. 95 no. 17 (October, 2009), ISSN 0003-6951
  21. Khasawneh, Firas A. and Mann, Brian P. and Insperger, Tamas and Stepan, Gabor, Increased Stability of Low-Speed Turning Through a Distributed Force and Continuous Delay Model, JOURNAL OF COMPUTATIONAL AND NONLINEAR DYNAMICS, vol. 4 no. 4 (October, 2009), ISSN 1555-1423
  22. Mann, B. P., Energy criterion for potential well escapes in a bistable magnetic pendulum, JOURNAL OF SOUND AND VIBRATION, vol. 323 no. 3-5 (June, 2009), pp. 864-876, ISSN 0022-460X
  23. B. P. Mann, Energy criterion for potential well escapes in a bistable magnetic pendulum, Journal Of Sound And Vibration, vol. 323 no. 3-5 (June, 2009), pp. 864 -- 876, ISSN 0022-460X
  24. Mann, B. P. and Khasawneh, F. A., An energy-balance approach for oscillator parameter identification, JOURNAL OF SOUND AND VIBRATION, vol. 321 no. 1-2 (March, 2009), pp. 65-78, ISSN 0022-460X
  25. B. P. Mann and F. A. Khasawneh, An energy-balance approach for oscillator parameter identification, Journal Of Sound And Vibration, vol. 321 no. 1-2 (March, 2009), pp. 65 -- 78, ISSN 0022-460X
  26. Mann, B. P. and Sims, N. D., Energy harvesting from the nonlinear oscillations of magnetic levitation, JOURNAL OF SOUND AND VIBRATION, vol. 319 no. 1-2 (January, 2009), pp. 515-530, ISSN 0022-460X
  27. B. P. Mann and N. D. Sims, Energy harvesting from the nonlinear oscillations of magnetic levitation, Journal Of Sound And Vibration, vol. 319 no. 1-2 (January, 2009), pp. 515 -- 530, ISSN 0022-460X
  28. Khasawneh, Firas A. and Patel, Bhavin and Mann, Brian P., A STATE-SPACE TEMPORAL FINITE ELEMENT APPROACH FOR STABILITY INVESTIGATIONS OF DELAY EQUATIONS, in SMASIS2009, VOL 1 (2009), pp. 415-423, ISBN 978-0-7918-4896-8
  29. Khasawneh, Firas A. and Mann, Brian P. and Insperger, Tamas and Stepan, Gabor, EXPLANATION FOR LOW-SPEED STABILITY INCREASES IN MACHINING: APPLICATION OF A CONTINUOUS DELAY MODEL, in PROCEEDINGS OF THE ASME DYNAMIC SYSTEMS AND CONTROL CONFERENCE 2008, PTS A AND B (2009), pp. 503-510, ISBN 978-0-7918-4335-2
  30. M. H. Kurdi and R. T. Haftka and T. L. Schmitz and B. P. Mann, A Robust Semi-Analytical Method for Calculating the Response Sensitivity of a Time Delay System, Journal Of Vibration And Acoustics-transactions Of The Asme, vol. 130 no. 6 (December, 2008), ISSN 1048-9002
  31. Kurdi, Mohammad H. and Haftka, Raphael T. and Schmitz, Tony L. and Mann, Brian P., A Robust Semi-Analytical Method for Calculating the Response Sensitivity of a Time Delay System, JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME, vol. 130 no. 6 (December, 2008), ISSN 1048-9002
  32. T. Insperger and B. P. Mann and T. Surmann and G. Stepan, On the chatter frequencies of milling processes with runout, International Journal Of Machine Tools & Manufacture, vol. 48 no. 10 (August, 2008), pp. 1081 -- 1089, ISSN 0890-6955
  33. Insperger, Tamas and Mann, Brian P. and Surmann, Tobias and Stepan, Gabor, On the chatter frequencies of milling processes with runout, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, vol. 48 no. 10 (August, 2008), pp. 1081-1089, ISSN 0890-6955
  34. J. Liu and D. T. Martin and T. Nishida and L. N. Cattafesta and M. Sheplak and B. P. Mann, Harmonic balance Nonlinear identification of a capacitive dual-backplate MEMS microphone, Journal Of Microelectromechanical Systems, vol. 17 no. 3 (June, 2008), pp. 698 -- 708, ISSN 1057-7157
  35. Liu, Jian and Martin, David T. and Nishida, Toshikazu and Cattafesta, III, Louis N. and Sheplak, Mark and Mann, Brian P., Harmonic balance Nonlinear identification of a capacitive dual-backplate MEMS microphone, JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, vol. 17 no. 3 (June, 2008), pp. 698-708, ISSN 1057-7157
  36. Mann, B. P. and Liu, J. and Hazra, S. S., Measurement nonlinearity interpreted as material behavior in dynamic nanoindentation, JOURNAL OF SOUND AND VIBRATION, vol. 311 no. 3-5 (April, 2008), pp. 1358-1370, ISSN 0022-460X
  37. B. P. Mann and J. Liu and S. S. Hazra, Measurement nonlinearity interpreted as material behavior in dynamic nanoindentation, Journal Of Sound And Vibration, vol. 311 no. 3-5 (April, 2008), pp. 1358 -- 1370, ISSN 0022-460X
  38. B. P. Mann and B. T. Edes and S. J. Easley and K. A. Young and K. Ma, Chatter vibration and surface location error prediction for helical end mills, International Journal Of Machine Tools & Manufacture, vol. 48 no. 3-4 (March, 2008), pp. 350 -- 361, ISSN 0890-6955
  39. Mann, Brian P. and Edes, Ben T. and Easley, Sam J. and Young, Keith A. and Ma, Kong, Chatter vibration and surface location error prediction for helical end mills, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, vol. 48 no. 3-4 (March, 2008), pp. 350-361, ISSN 0890-6955
  40. Liu, Han and Martin, David T. and Kadirvel, Karthik and Nishida, Toshikazu and Cattafesta, Louis and Sheplak, Mark and Mann, Brian P., Nonlinear model and system identification of a capacitive dual-backplate MEMS microphone, JOURNAL OF SOUND AND VIBRATION, vol. 309 no. 1-2 (January, 2008), pp. 276-292, ISSN 0022-460X
  41. B. R. Patel and B. P. Mann and K. A. Young, Uncharted islands of chatter instability in milling, International Journal Of Machine Tools & Manufacture, vol. 48 no. 1 (January, 2008), pp. 124 -- 134, ISSN 0890-6955
  42. H. Liu and D. T. Martin and K. Kadirvel and T. Nishida and L. Cattafesta and M. Sheplak and B. P. Mann, Nonlinear model and system identification of a capacitive dual-backplate MEMS microphone, Journal Of Sound And Vibration, vol. 309 no. 1-2 (January, 2008), pp. 276 -- 292, ISSN 0022-460X
  43. Patel, B. R. and Mann, B. P. and Young, K. A., Uncharted islands of chatter instability in milling, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, vol. 48 no. 1 (January, 2008), pp. 124-134, ISSN 0890-6955
  44. Liu, J., Martin, D.T., Kadirvel, K., Nishida, T., Catafesta L.N., Sheplak, M., Mann, B.P., Harmonic balance nonlinear identification from steady state response of a dual backplate MEMS microphone, Journal of Microelectromechanical Systems, vol. 117 no. 3 (2008), pp. 1358-1370
  45. N.D. Sims, B.P. Mann, Analytical prediction of chatter stability for variable pitch and variable helix milling tools, Journal of Sound and Vibration, vol. 317 no. 3-5 (2008), pp. 664-686
  46. T. Insperger, B.P. Mann, T. Surmann, and G. Stepan, On the chatter frequencies of milling processes with runout, International Journal of Machine Tools and Manufacture, vol. 48 (2008), pp. 1081-1089
  47. B.P. Mann and N.D. Sims, Energy harvesting from the nonlinear oscillations of magnetic levitation, Journal of Sound and Vibration (2008)
  48. Liu, J., Martin, D.T., Kadirvel, K., Nishida, T., Catafesta L.N., Sheplak, M., Mann, B.P., Nonlinear model and system identification of a capacitive dual-backplate MEMS microphone, Journal of Sound and Vibration, vol. 309 (2008), pp. 276-292
  49. Patel, B., Mann, B.P., Young, K.A., Uncharted islands of chatter instability in milling, International Journal of Machine Tools and Manufacture, vol. 48 no. 1-2 (2008), pp. 124-134
  50. Mann, B.P., Edes, B.T., Young, Easley, S.J., K.A., Ma, K., Surface location error and chatter prediction for helical end mills, International Journal of Machine Tools and Manufacture, vol. 317 no. 3-5 (2008), pp. 664-686
  51. Mann, B.P., Liu, J., Hazra, S.S., Measurement nonlinearity interpreted as material behavior in dynamic nanoindentation, Journal of Sound and Vibration, vol. 311 (2008), pp. 1358-1370
  52. Long, X.H., Balachandran, B., Mann, B.P., Dynamics of milling processes with variable time delay, Nonlinear Dynamics, vol. 47 no. 4 (2007), pp. 49-63
  53. Garg, N.K., Mann, B.P., Kim, N.H., Kurdi, M.H., Stability of a time-delayed system with parametric excitation, Journal of Dynamic Systems Measurement and Control, vol. 129 (2007), pp. 125–135
  54. Mann, B.P., Carter, R.E., Hazra, S.S., Experimental study of an impact oscillator with viscoelastic and Hertzian contact, Nonlinear Dynamics, vol. 50 no. 3 (2007), pp. 587–596
  55. Koplow, M.A., Bhattacharyya, A., Mann, B.P., Closed form solutions for the dynamic response of Euler-Bernoulli beams with step changes in cross section, Journal of Sound and Vibration, vol. 295 no. 1-2 (2006), pp. 214-225
  56. Mann, B.P., Koplow, M.A.,, Symmetry breaking bifurcations in a parametrically excited pendulum, Nonlinear Dynamics, vol. 46 no. 4 (2006), pp. 427–437
  57. Schmitz, T.L., Mann, B.P.,, Closed form solutions for the prediction of surface location error in milling, International Journal of Machine Tools and Manufacture, vol. 46 (2006), pp. 1369-1377
  58. Mann, B.P., Young, K.A., An empirical approach for delayed oscillator stability and parametric identification, Proceedings of the Royal Society A, vol. 462 (2006), pp. 2145–2160
  59. Mann, B.P., Young, K.A., Schmitz, T.L., Dilley, D.N., Simultaneous stability and surface location error predictions in milling, Journal of Manufacturing Science and Engineering, vol. 127 (2005), pp. 446-453
  60. Stépán, G., Szalai, R., Mann, B.P., Bayly, P.V., Inpserger, T., Gradisek, J., Grovekar, E., Non-linear dynamics of high-speed milling – Analyses, numerics, and experiments, Journal of Vibration and Acoustics, vol. 127 (2005), pp. 197-203
  61. Mann, B.P., Garg, N.K., Young, K.A., Helvey, A.M., Milling bifurcations from structural asymmetry and nonlinear regeneration, Nonlinear Dynamics, vol. 42 no. 4 (2005), pp. 319-337
  62. Mann, B.P., Bayly, P.V., Davies, M.A., Halley, J.E., Limit cycles, bifurcations, and accuracy of the milling process, Journal of Sound and Vibration, vol. 277 (2004), pp. 31-48
  63. Insperger, T., Stépán, G., Bayly, P.V., Mann, B.P., Multiple chatter frequencies in milling processes, Journal of Sound and Vibration, vol. 262 (2003), pp. 333-345
  64. Bayly, P.V., Halley, J.E., Davies, M.A., Mann, B.P., Stability of interrupted cutting by time finite element analysis, Journal of Manufacturing Science and Engineering, vol. 125 (2003), pp. 220-225
  65. Mann, B.P., Insperger, T., Bayly, P.V., Stépán, G., Stability of up-milling and down-milling, Part 2: Experimental Verification, International Journal of Machine Tools and Manufacture, vol. 43 (2003), pp. 35-40
  66. Insperger, T., Mann, B.P., Stépán, G., Bayly, P.V., Stability of up-milling and down-milling, Part 1: Alternative analytical methods, vol. 43 (2003), pp. 25-34

Papers Accepted

  1. Kurdi, M.H., Haftka, R.T., Schmitz, T.L., Mann, B.P, Milling optimization of removal rate and accuracy with uncertainty - Part 1: Parameter Selection, International Journal of Materials Product and Technology (2007)
  2. Kurdi, M.H., Haftka, R.T., Schmitz, T.L., Mann, B.P., Milling optimization of removal rate and accuracy with uncertainty - Part 1: Parameter Selection, International Journal of Materials Product and Technology (2007)