Pratt School of Engineering
 HOME > pratt > Deans    Search Help Login 

Publications of Tod A Laursen    :chronological  alphabetical  combined  bibtex listing:

Papers Published

  1. T. Y. Kim and J. Dolbow and T. Laursen, A mortared finite element method for frictional contact on arbitrary interfaces, Computational Mechanics, vol. 39 no. 3 (February, 2007), pp. 223 -- 235, ISSN 0178-7675  [abs]
  2. M. A. Puso and T. A. Laursen and J. Solberg, A segment-to-segment mortar contact method for quadratic elements and large deformations, Computer Methods In Applied Mechanics And Engineering, vol. 197 no. 6-8 (2007), pp. 555 -- 566, ISSN 0045-7825  [abs]
  3. B. Yang and T. A. Laursen, A large deformation mortar formulation of self contact with finite sliding, Computer Methods In Applied Mechanics And Engineering, vol. 197 no. 6-8 (2007), pp. 756 -- 772, ISSN 0045-7825  [abs]
  4. I. Stanciulescu and L. N. Virgin and T. A. Laursen, Slender solar sail booms: Finite element analysis, Journal Of Spacecraft And Rockets, vol. 44 no. 3 (2007), pp. 528 -- 537, ISSN 0022-4650  [abs]
  5. Upton, Maureen L. and Guilak, Farshid and Laursen, Tod A. and Setton, Lori A., Finite element modeling predictions of region-specific cell-matrix mechanics in the meniscus, Biomechanics and Modeling in Mechanobiology, vol. 5 no. 2-3 (2006), pp. 140 - 149 [s10237-006-0031-4]  [abs]
  6. Trickey, Wendy R. and Baaijens, Frank P.T. and Laursen, Tod A. and Alexopoulos, Leonidas G. and Guilak, Farshid, Determination of the Poisson's ratio of the cell: Recovery properties of chondrocytes after release from complete micropipette aspiration, Journal of Biomechanics, vol. 39 no. 1 (2006), pp. 78 - 87 [006]  [abs]
  7. Stanciulescu, Ilinca and Laursen, Tod A., On the interaction of frictional formulations with bifurcation phenomena in hyperelastic steady state rolling calculations, International Journal of Solids and Structures, vol. 43 no. 10 (2006), pp. 2959 - 2988 [039]  [abs]
  8. Laursen, Tod A. and Stanciulescu, Ilinca, An algorithm for incorporation of frictional sliding conditions within a steady state rolling framework, Communications in Numerical Methods in Engineering, vol. 22 no. 4 (2006), pp. 301 - 318 [815]  [abs]
  9. Upton, Maureen L. and Laursen, Tod A. and Guilak, Farshid and Setton, Lori A., Finite element modeling of region-specific cell-matrix interactions in the meniscus, Proceedings of the 2005 Summer Bioengineering Conference, vol. 2005 (2005), pp. 229 - 230, Vail, CO, United States
  10. Bohrer, Gil and Mourad, Hashem and Laursen, Tod A. and Drewry, Darren and Avissar, Roni and Poggi, Davide and Oren, Ram and Katul, Gabriel G., Finite element tree crown hydrodynamics model (FETCH) using porous media flow within branching elements: A new representation of tree hydrodynamics, Water Resources Research, vol. 41 no. 11 (2005), pp. 11404 - [2005WR004181]  [abs]
  11. Baaijens, Frank P.T. and Trickey, Wendy R. and Laursen, Tod A. and Guilak, Farshid, Large deformation finite element analysis of micropipette aspiration to determine the mechanical properties of the chondrocyte, Annals of Biomedical Engineering, vol. 33 no. 4 (2005), pp. 494 - 501 [s10439-005-2506-3]  [abs]
  12. Yang, Bin and Laursen, Tod A. and Meng, Xiaonong, Two dimensional mortar contact methods for large deformation frictional sliding, International Journal for Numerical Methods in Engineering, vol. 62 no. 9 (2005), pp. 1183 - 1225 [1222]  [abs]
  13. Puso, Michael A. and Laursen, Tod A., A mortar segment-to-segment contact method for large deformation solid mechanics, Computer Methods in Applied Mechanics and Engineering, vol. 193 no. 6-8 (2004), pp. 601 - 629 [010]  [abs]
  14. Matos, R.S. and Laursen, T.A. and Vargas, J.V.C. and Bejan, A., Three-dimensional optimization of staggered finned circular and elliptic tubes in forced convection, International Journal of Thermal Sciences, vol. 43 no. 5 (2004), pp. 477 - 487 [003]  [abs]
  15. Matos, R.S. and Vargas, J.V.C. and Laursen, T.A. and Bejan, A., Optimally staggered finned circular and elliptic tubes in forced convection, International Journal of Heat and Mass Transfer, vol. 47 no. 6-7 (2004), pp. 1347 - 1359 [015]  [abs]
  16. Puso, Michael A. and Laursen, Tod A., A mortar segment-to-segment frictional contact method for large deformations, Computer Methods in Applied Mechanics and Engineering, vol. 193 no. 45-47 (2004), pp. 4891 - 4913 [001]  [abs]
  17. Laursen, T.A., The Melosh competition, Finite Elements in Analysis and Design, vol. 39 no. 8 (2003), pp. 681 - 682 [S0168-874X(03)00053-2]
  18. Love, G.R. and Laursen, T.A., Improved implicit integrators for transient impact problems - dynamic frictional dissipation within an admissible conserving framework, Computer Methods in Applied Mechanics and Engineering, vol. 192 no. 19 (2003), pp. 2223 - 2248 [S0045-7825(03)00257-3]  [abs]
  19. Puso, Michael A. and Laursen, Tod A., Mesh tying on curved interfaces in 3D, Engineering Computations (Swansea, Wales), vol. 20 no. 3-4 (2003), pp. 305 - 319 [02644400310467225]  [abs]
  20. Laursen, T.A. and Heinstein, M.W., Consistent mesh tying methods for topologically distinct discretized surfaces in non-linear solid mechanics, International Journal for Numerical Methods in Engineering, vol. 57 no. 9 (2003), pp. 1197 - 1242 [721]  [abs]
  21. Baer, Anthony E. and Laursen, Tod A. and Guilak, Farshid and Setton, Lori A., The micromechanical environment of intervertebral disc cells determined by a finite deformation, anisotropic, and biphasic finite element model, Journal of Biomechanical Engineering, vol. 125 no. 1 (2003), pp. 1 - 11 [1.1532790]  [abs]
  22. Heinstein, M.W. and Laursen, T.A., A three-dimensional surface-to-surface projection algorithm for non-coincident domains, Communications in Numerical Methods in Engineering, vol. 19 no. 6 (2003), pp. 421 - 432 [601]  [abs]
  23. Love, G.R. and Laursen, T.A., Improved implicit integrators for transient impact problems-dynamic frictional dissipation within an admissible conserving framework, Comput. Methods Appl. Mech. Eng. (Netherlands), vol. 192 no. 19 (2003), pp. 2223 - 48 [S0045-7825(03)00257-3]  [abs]
  24. Meng, X.N. and LeRoux, M.A. and Laursen, T.A. and Setton, L.A., A nonlinear finite element formulation for axisymmetric torsion of biphasic materials, International Journal of Solids and Structures, vol. 39 no. 4 (2002), pp. 879 - 895 [S0020-7683(01)00249-9]  [abs]
  25. Meng, X.N. and Laursen, T.A., On energy consistency of large deformation plasticity models, with application to the design of unconditionally stable time integrators, Finite Elements in Analysis and Design, vol. 38 no. 10 (2002), pp. 949 - 963 [S0168-874X(02)00087-2]  [abs]
  26. Puso, Michael Anthony and Laursen, Tod A., A 3D contact smoothing method using Gregory patches, International Journal for Numerical Methods in Engineering, vol. 54 no. 8 (2002), pp. 1161 - 1194 [466]  [abs]
  27. Laursen, T.A. and Love, G.R., Improved implicit integrators for transient impact problems - Geometric admissibility within the conserving framework, International Journal for Numerical Methods in Engineering, vol. 53 no. 2 (2002), pp. 245 - 274 [264]  [abs]
  28. Meng, X.N. and Laursen, T.A., Energy consistent algorithms for dynamic finite deformation plasticity, Computer Methods in Applied Mechanics and Engineering, vol. 191 no. 15-16 (2002), pp. 1639 - 1675 [S0045-7825(01)00349-8]  [abs]
  29. Laursen, T.A. and Love, G.R., Improved implicit integrators for transient impact problems-geometric admissibility within the conserving framework, Int. J. Numer. Methods Eng. (UK), vol. 53 no. 2 (2002), pp. 245 - 74 [264]  [abs]
  30. Laursen, T.A., The Melosh Competition, Finite Elements in Analysis and Design, vol. 37 no. 11 (2001), pp. 821 - 823 [S0168-874X(01)00069-5]
  31. Laursen, T.A. and Sze, K.Y., A new editorial team for finite elements in analysis and design, Finite Elements in Analysis and Design, vol. 38 no. 1 (2001), pp. 1 - 2 [S0168-874X(01)00108-1]
  32. Matos, R.S. and Vargas, J.V.C. and Laursen, T.A. and Saboya, F.E.M., Optimization study and heat transfer comparison of straggered circular and elliptic tubes in forced convection, International Journal of Heat and Mass Transfer, vol. 44 no. 20 (2001), pp. 3953 - 3961 [S0017-9310(01)00006-0]  [abs]
  33. Padmanabhan, V. and Laursen, T.A., Framework for development of surface smoothing procedures in large deformation frictional contact analysis, Finite Elements in Analysis and Design, vol. 37 no. 3 (2001), pp. 173 - 198 [S0168-874X(00)00029-9]  [abs]
  34. Meng, X.N. and LeRoux, M.A. and Setton, L.A. and Laursen, T.A., Biphasic finite element formulation for modeling nonlinear response of articular cartilage to torsion, American Society of Mechanical Engineers, Bioengineering Division (Publication) BED, vol. 50 (2001), pp. 549 - 550, Snowbird, UT, United States  [abs]
  35. Baer, Anthony E. and Laursen, Tod A. and Setton, Lori A., A finite-deformation, anisotropic, biphasic finite element model of cell-matrix interactions in the intervertebral disc, American Society of Mechanical Engineers, Bioengineering Division (Publication) BED, vol. 50 (2001), pp. 799 - 800, Snowbird, UT, United States  [abs]
  36. Laursen, T.A. and Meng, X.N., A new solution procedures for application of energy-conserving algorithms to general constitutive models in nonlinear elastodynamics, Computer Methods in Applied Mechanics and Engineering, vol. 190 no. 46-47 (2001), pp. 6309 - 6322 [S0045-7825(01)00257-2]  [abs]
  37. LeRoux, Michelle A. and Upton, Maureen L. and Laursen, Tod A. and Setton, Lori A., Biphasic finite element modeling of tear effects on the mechanics of the meniscus, American Society of Mechanical Engineers, Bioengineering Division (Publication) BED, vol. 50 (2001), pp. 851 - 852, Snowbird, UT, United States  [abs]
  38. McDevitt, T.W. and Laursen, T.A., Mortar-finite element formulation for frictional contact problems, International Journal for Numerical Methods in Engineering, vol. 48 no. 10 (2000), pp. 1525 - 1547 [1097-0207(20000810)48:10<1525::AID-NME953>3.0.CO;2-Y]  [abs]
  39. Heinstein, Martin W. and Mello, Frank J. and Attaway, Stephen W. and Laursen, Tod A., Contact-impact modeling in explicit transient dynamics, Computer Methods in Applied Mechanics and Engineering, vol. 187 no. 3 (2000), pp. 621 - 640 [S0045-7825(99)00342-4]  [abs]
  40. Laursen, T.A., On the development of thermodynamically consistent algorithms for thermomechanical frictional contact, Computer Methods in Applied Mechanics and Engineering, vol. 177 no. 3-4 (1999), pp. 273 - 287 [S0045-7825(98)00385-5]  [abs]
  41. Heinstein, Martin W. and Laursen, Tod A., Algorithm for the matrix-free solution of quasistatic frictional contact problems, International Journal for Numerical Methods in Engineering, vol. 44 no. 9 (1999), pp. 1205 - 1226 [(SICI)1097-0207(19990330)44:9<1205::AID-NME550>3.0.CO;2-0]  [abs]
  42. Mousseau, C.W. and Laursen, T.A. and Lidberg, M. and Taylor, R.L., Vehicle dynamics simulations with coupled multibody and finite element models, Finite Elem. Anal. Des. (Netherlands), vol. 31 no. 4 (1999), pp. 295 - 315 [S0168-874X(98)00070-5]  [abs]
  43. Oancea, V.G. and Laursen, T.A., Investigations of low frequency stick-slip motion: Experiments and numerical modelling, Journal of Sound and Vibration, vol. 213 no. 4 (1998), pp. 577 - 600 [1496]  [abs]
  44. Chawla, V. and Laursen, T.A., Energy consistent algorithms for frictional contact problems, International Journal for Numerical Methods in Engineering, vol. 42 no. 5 (1998), pp. 799 - 827 [(SICI)1097-0207(19980715)42:5<799::AID-NME385>3.0.CO;2-F]  [abs]
  45. Oancea, V.G. and Laursen, T.A., Stability analysis of state dependent dynamic frictional sliding, International Journal of Non-Linear Mechanics, vol. 32 no. 5 (1997), pp. 837 - 853 [S0020-7462(96)00082-0]  [abs]
  46. Oancea, V.G. and Laursen, T.A., Finite element formulation of thermomechanical rate-dependent frictional sliding, International Journal for Numerical Methods in Engineering, vol. 40 no. 23 (1997), pp. 4275 - 4311 [(SICI)1097-0207(19971215)40:23<4275::AID-NME257>3.0.CO;2-K]  [abs]
  47. Laursen, T.A. and Chawla, V., Design of energy conserving algorithms for frictionless dynamic contact problems, International Journal for Numerical Methods in Engineering, vol. 40 no. 5 (1997), pp. 863 - 886 [(SICI)1097-0207(19970315)40:5<863::AID-NME92>3.0.CO;2-V]  [abs]
  48. Laursen, T.A. and Oancea, V.G., On the constitutive modeling and finite element computation of rate-dependent frictional sliding in large deformations, Computer Methods in Applied Mechanics and Engineering, vol. 143 no. 3-4 (1997), pp. 197 - 227 [S0045-7825(96)01157-7]  [abs]
  49. Elliott, Dawn M. and LeRoux, Michelle A. and Laursen, Tod A. and Setton, Lori A., Formulation of a continuum anisotropic model for the anulus fibrosus in tension, American Society of Mechanical Engineers, Bioengineering Division (Publication) BED, vol. 36 (1997), pp. 165 - 166, Dallas, TX, USA  [abs]
  50. Donescu, Pompiliu and Laursen, Tod A., Generalized object-oriented approach to solving ordinary and partial differential equations using finite elements, Finite Elements in Analysis and Design, vol. 22 no. 1 (1996), pp. 93 - 107 [0168-874X(95)00061-W]  [abs]
  51. Oancea, V.G. and Laursen, T.A., Dynamics of a state variable frictional law in finite element analysis, Finite Elements in Analysis and Design, vol. 22 no. 1 (1996), pp. 25 - 40 [0168-874X(95)00057-Z]  [abs]
  52. Laursen, T.A. and Maker, B.N., Augmented Lagrangian quasi-newton solver for constrained nonlinear finite element applications, International Journal for Numerical Methods in Engineering, vol. 38 no. 21 (1995), pp. 3571 - 3590  [abs]
  53. Vargas, J.V.C. and Laursen, T.A. and Bejan, A., Nonsimilar solutions for mixed convection on a wedge embedded in a porous medium, International Journal of Heat and Fluid Flow, vol. 16 no. 3 (1995), pp. 211 - 216 [0142-727X(95)97182-R]  [abs]
  54. Laursen, T.A. and Oancea, V.G., Automation and assessment of augmented Lagrangian algorithms for frictional contact problems, Winter Annual Meeting of the American Society of Mechanical Engineers (1994), pp. 1 - 8, Chicago, IL, USA  [abs]
  55. Laursen, T.A. and Oancea, V.G., Automation and assessment of augmented Lagrangian algorithms for frictional contact problems, Journal of Applied Mechanics, Transactions ASME, vol. 61 no. 4 (1994), pp. 956 - 963  [abs]
  56. Laursen, T.A. and Govindjee, S., Note on the treatment of frictionless contact between non-smooth surfaces in fully non-linear problems, Communications in Numerical Methods in Engineering, vol. 10 no. 11 (1994), pp. 869 - 878  [abs]
  57. Laursen, T.A., Convected description in large deformation frictional contact problems, International Journal of Solids and Structures, vol. 31 no. 5 (1994), pp. 669 - 681 [0020-7683(94)90145-7]  [abs]
  58. Maker, B.N. and Laursen, T.A., Finite element formulation for rod/continuum interactions: the one-dimensional slideline, International Journal for Numerical Methods in Engineering, vol. 37 no. 1 (1994), pp. 1 - 18  [abs]
  59. Laursen, T.A. and Simo, J.C., Continuum-based finite element formulation for the implicit solution of multibody, large defromation frictional contact problems, International Journal for Numerical Methods in Engineering, vol. 36 no. 20 (1993), pp. 3451 - 3485  [abs]
  60. Simo, J.C. and Laursen, T.A., Augmented lagrangian treatment of contact problems involving friction, Computers and Structures, vol. 42 no. 1 (1992), pp. 97 - 116 [0045-7949(92)90540-G]  [abs]
  61. Laursen, T.A. and Simo, J.C., Study of the mechanics of microindentation using finite elements, Journal of Materials Research, vol. 7 no. 3 (1992), pp. 618 - 626  [abs]
Duke University * Pratt * Deans * Staff * Faculty * Reload * Login
x